Property report Maranoa, QLD
Grade D: far from the grid for a solar farm
15 km to a 66 kV line: farther than 9 in 10 operating farms.
Sources: Geoscience Australia, Global Solar Atlas, CSIRO, ABARES Updated 14 Oct 2026 Sources and methods
AREA 1,215 HALOTS 5
Lots in this property (5)
| Lot/plan | Area | Remove |
|---|---|---|
| 151WV442 | Area: 513 ha | Remove 151WV442Remove |
| 154WV442 | Area: 355 ha | Remove 154WV442Remove |
| 1RP95552 | Area: 90 ha | Remove 1RP95552Remove |
| 1SP146148 | Area: 202 ha | Remove 1SP146148Remove |
| 46WV6 | Area: 55 ha | Remove 46WV6Remove |
Add a neighbouring lot
| Lot/plan | Area | Add |
|---|---|---|
| 51WV1153 | Area: 2,093 ha | Add 51WV1153Add |
| 52WV1153 | Area: 2,035 ha | Add 52WV1153Add |
| 57WAL5316 | Area: 1,064 ha | Add 57WAL5316Add |
| 1WV1230 | Area: 651 ha | Add 1WV1230Add |
| 152WV442 | Area: 514 ha | Add 152WV442Add |
| 148WV441 | Area: 506 ha | Add 148WV441Add |
| 55WAL53697 | Area: 494 ha | Add 55WAL53697Add |
| 45WV984 | Area: 492 ha | Add 45WV984Add |
| 153WV442 | Area: 437 ha | Add 153WV442Add |
| 150WV441 | Area: 423 ha | Add 150WV441Add |
| 2WV1230 | Area: 399 ha | Add 2WV1230Add |
| 2SP146148 | Area: 231 ha | Add 2SP146148Add |
Grid
Farther from the grid than most operating farms
- Nearest substation
- 49 km
- Roma 132 kV substation. Median farm 3.2 km.
- Nearest line, 66 kV or more
- 15 km
- 66 kV. Median farm 0.8 km.
Land and sun
Steeper than most operating farms
- Slope within 500 m
- 3.0°
- Steeper than 96% of operating solar farms (median 0.8°). Across the property 0.2° to 21.3°.
- Full sun a day
- 5.0 h
- More sun than 89% of operating solar farms (median 4.7 hours a day)
Land use by area
- Grazing native vegetation
- 1,110 ha, 91%
- Cropping
- 105 ha, 9%
Hear if developers start looking for land near here
Questions
How is the property compared with built solar farms?
Site by site, measured the way the farms are. The property is split into sites the size of a solar farm, circles of 500 m radius, each wholly inside the lots. Each site is measured as each built farm is at its centre: straight-line distance to the nearest substation and to the nearest 66 kV or higher line, solar yield at the centre, and average slope within 500 m. Each site is graded as the land check grades a point, against Australia's operating solar farms of 5 MW or more, with the property's own area: under 20 ha the grade is at most C, and over 300 ha the site is also compared with farms of 100 MW or more. The property isn't graded when half or more of it is protected, built up or water, or when its edge is more than 100 km from a substation. The best site is the one with the best grade, then the closest to the grid and flattest overall; the typical site is the middle one. A lot too small for one site is measured at a point inside it.
Why is the distance from the edge shorter than from the best site?
A large property reaches farther, so its nearest edge is closer to things than any one site on it. The ranking uses sites, measured as built farms are; the edge distance is shown beside it.
How is the whole property measured?
Solar yield and slope are averaged over every grid cell whose centre falls inside the lots: cells of about 1 km for yield and about 90 m for slope. A property smaller than one yield cell takes the value at its centre. Land use is the area of each class at 50 m. The slope bands are plain bins, not a judgement.
Where do the lot boundaries come from?
NSW lots: cadastre © State of NSW (Spatial Services), CC BY 3.0 AU. Queensland lots: the Digital Cadastral Database © State of Queensland (Department of Resources), CC BY 4.0. Each lot is read when first asked for and kept for 30 days. Lots within 60 m of the property, across a road for example, are offered as adjoining lots. A lot is a parcel of land, not a title or an owner: no ownership details are read or shown.
Where do the addresses come from?
From each state's own address service, read when you search: NSW Spatial Services, Queensland's address database and Vicmap Address. Addresses: © State of NSW (Spatial Services), CC BY 3.0 AU; © State of Queensland (Department of Resources), CC BY 4.0; Vicmap Address © State of Victoria, CC BY 4.0. Towns: ABS Suburbs and Localities 2021, CC BY 4.0.
Why only NSW and Queensland?
Property selection covers NSW and Queensland so far, whose cadastres can be read openly lot by lot. Everywhere else the land check works by point. Address search also covers Victoria.
Is this property stored?
Each report stores its lot numbers, the result and the date, at the property's centre rounded to about 100 m. If you answer the hosting question, that is saved with it. See the privacy page.