Energy Figures

Australia

Property report Maranoa, QLD

Grade B: sited like most solar farms

1.2 km to a 66 kV line: as close as most operating farms.

Sources: Geoscience Australia, Global Solar Atlas, CSIRO, ABARES Updated 14 Oct 2026 Sources and methods

Add lot 42SP220293Add lot 8WV1581Add lot 5WAL53123Add lot 43WAL53279Add lot 6WAL53123Add lot 39WV1940Add lot 23WV1088Add lot 19SP302124Add lot 32N25273Lot 38WV1741Lot 7WV10881 km

AREA 106 HALOTS 2

Cadastre © State of Queensland (Department of Resources), CC BY 4.0Your propertyNeighbouring lot, tap to add
Lots in this property (2)
Lots in this property
Lot/planAreaRemove
38WV1741Area: 4.1 haRemove 38WV1741Remove
7WV1088Area: 102 haRemove 7WV1088Remove

Add a neighbouring lot

Neighbouring lots
Lot/planAreaAdd
42SP220293Area: 199 haAdd 42SP220293Add
8WV1581Area: 173 haAdd 8WV1581Add
5WAL53123Area: 119 haAdd 5WAL53123Add
43WAL53279Area: 104 haAdd 43WAL53279Add
6WAL53123Area: 104 haAdd 6WAL53123Add
39WV1940Area: 77 haAdd 39WV1940Add
23WV1088Area: 33 haAdd 23WV1088Add
19SP302124Area: 21 haAdd 19SP302124Add
32N25273Area: 2.0 haAdd 32N25273Add

Grid

Farther from the grid than most operating farms

Nearest substation
43 km
Roma 132 kV substation. Median farm 3.2 km.
Nearest line, 66 kV or more
1.2 km
66 kV. Median farm 0.8 km.

Land and sun

Flatter than most operating farms

Slope within 500 m
0.4°
Flatter than 71% of operating solar farms (median 0.8°). Across the property 0.1° to 1.4°.
Full sun a day
4.9 h
More sun than 88% of operating solar farms (median 4.7 hours a day)

Land use by area

Cropping
97 ha, 90%
Grazing native vegetation
5.8 ha, 5%
Other conserved area
4.5 ha, 4%

Hear if developers start looking for land near here

Questions

How is the property compared with built solar farms?

Site by site, measured the way the farms are. The property is split into sites the size of a solar farm, circles of 500 m radius, each wholly inside the lots. Each site is measured as each built farm is at its centre: straight-line distance to the nearest substation and to the nearest 66 kV or higher line, solar yield at the centre, and average slope within 500 m. Each site is graded as the land check grades a point, against Australia's operating solar farms of 5 MW or more, with the property's own area: under 20 ha the grade is at most C, and over 300 ha the site is also compared with farms of 100 MW or more. The property isn't graded when half or more of it is protected, built up or water, or when its edge is more than 100 km from a substation. The best site is the one with the best grade, then the closest to the grid and flattest overall; the typical site is the middle one. A lot too small for one site is measured at a point inside it.

Why is the distance from the edge shorter than from the best site?

A large property reaches farther, so its nearest edge is closer to things than any one site on it. The ranking uses sites, measured as built farms are; the edge distance is shown beside it.

How is the whole property measured?

Solar yield and slope are averaged over every grid cell whose centre falls inside the lots: cells of about 1 km for yield and about 90 m for slope. A property smaller than one yield cell takes the value at its centre. Land use is the area of each class at 50 m. The slope bands are plain bins, not a judgement.

Where do the lot boundaries come from?

NSW lots: cadastre © State of NSW (Spatial Services), CC BY 3.0 AU. Queensland lots: the Digital Cadastral Database © State of Queensland (Department of Resources), CC BY 4.0. Each lot is read when first asked for and kept for 30 days. Lots within 60 m of the property, across a road for example, are offered as adjoining lots. A lot is a parcel of land, not a title or an owner: no ownership details are read or shown.

Where do the addresses come from?

From each state's own address service, read when you search: NSW Spatial Services, Queensland's address database and Vicmap Address. Addresses: © State of NSW (Spatial Services), CC BY 3.0 AU; © State of Queensland (Department of Resources), CC BY 4.0; Vicmap Address © State of Victoria, CC BY 4.0. Towns: ABS Suburbs and Localities 2021, CC BY 4.0.

Why only NSW and Queensland?

Property selection covers NSW and Queensland so far, whose cadastres can be read openly lot by lot. Everywhere else the land check works by point. Address search also covers Victoria.

Is this property stored?

Each report stores its lot numbers, the result and the date, at the property's centre rounded to about 100 m. If you answer the hosting question, that is saved with it. See the privacy page.